Adjusting conical burrs
Some types of coffee may require a wider grind range to achieve an ideal extraction or brew.
A feature of your Design Coffee Grinder Advanced Pro is the ability to extend this range with
an adjustable upper burr. We recommend making only one adjustment at a time.
sOLvIng PrOBLeMs
If any problems occur during operation, you will find solutions in this section. Further informa-
tion is given in section ›Tips for Best Results‹.
Problem
reason
The solution
Emergency stop
Press the START | PAUSE | CANCEL button
to stop the milling works.
Then, unplug the power cord from power
outlet.
You cannot lock the
bean hopper.
Coffee beans are
obstructing the bean
hopper lock.
Remove bean hopper. Remove coffee
beans from the top of the milling works. Re-
assemble the bean hopper and try again.
The message »LOCK
BEAN HOPPER« is dis
-
played on the screen.
There is no reaction to
any operating element.
The bean hopper is
not installed or not
properly locked.
Ensure assembling the appliance correctly
according to the instructions in section Pre-
paring the Appliance for Use. Turn the lock
of the bean hopper clockwise to lock the
bean hopper properly on the grinder.
40
13
Hold hopper over container & turn dial to release
beans into container
Align hopper into
position
Run grinder until empty Remove hopper
Unlock hopper
1
2
3
4
5
Move adjustable top
burr, 1 number,
coarser or finer
Remove wire handle
from both sides of
the burr
Align the number with
the handle opening
Remove upper burr
6
88
7
7
9
Insert wire handle from
both sides of the burr
10
Push upper burr firmly
into position
11
Lock upper burr
12
Align hopper into
position
AIR TIGHT
CONTAINER
14
Lock hopper
15
Check your extraction
FINE
COARSE
FINE COARSE
4
5
6 7
8
FIN
E
C
OA
RS
E
FIN
E
C
OA
RS
E
