background image

EN

EN

26

27

NOTE

Before cleaning, soak dried-on residues of food sticking to the 

removable parts

 for 

approx. 10 minutes in lukewarm dishwater. You may clean the 

removable parts

 

(fruit come, juicing cone, filter basket, juice collector) in an automatic dishwasher 

(see: ‘Using an Automatic Dish-Washer’).

4.   Clean fruit dome, juicing cone, filter basket, and juice collector with a soft nylon 

brush and warm dishwater.

5.  

Ensure that there are no residues of juice or pulp left in the interior of the 

juicing cone.

 If required, use a little bottle brush for cleaning the interior of the 

juicing cone. Otherwise the juicing cone could stick stubbornly at the drive shaft.

6.   Ensure to clean the juice outlet and juice spout of the juice collector thoroughly. 

This may avoid clogging on later use. However, do not poke in the juice outlet 

or juice spout, but rinse these parts via a jet of tap water.

7.   After cleaning, rinse with clear tap water and wipe dry with a soft cloth. Leave 

the parts dry naturally for approx. 1/2 hour, where they are 

out of reach of 

children younger than 8 years

.

USING AN AUTOMATIC DISH-WASHER

Juicing cone, filter basket, juice collector, and fruit dome may be cleaned in an 

automatic dish-washer. However, 

do not place the motor base in the dish-washer!

Even when cleaning the removable parts in an automatic dish-washer, always rinse 

the parts of the juicing system under running tap water immediately after use. Doing 

so, especially ensure to purge all residues of pulp out of the juice outlet and juice 

spout of the juice collector. Dried-on residues of fibres could adhere stubbornly to the 

surfaces, making it extremely difficult to get these parts really clean.
For cleaning, place all parts in the upper rack and select a low temperature.

CLEANING THE MOTOR BASE AND POWER CORD

WARNING

 – Do not poke under the drive shaft or in the joint of the press 

arm. Remove any residues with a damp, not dripping cloth. Do not use any hard 

objects for scraping off residues of food. Do not pour any liquids into the top plate 

of the motor base.

IMPORTANT - 

The drive shaft must be completely clean without any residues or 

stains of juice or pulp on it. Otherwise, the juicing cone cannot slip on the drive 

shaft correctly or sticks stubbornly on the drive shaft after operation.

8.   Wipe the drive shaft via a soft damp cloth. Make sure that no residues of food 

dry on the drive shaft. Also remove any splashes from the interior of the top plate 

and the press arm.

9.   Wipe the exterior of the motor base and the power cord with a damp, not drip-

ping cloth. If necessary, clean the working area under the appliance.

10.  After cleaning, polish with a dry cloth. Leave the parts dry naturally for approx. 

1/2 hour, where it is 

out of reach of children younger than 8 years

.

11.  Reassemble the appliance (see: ‘Operation / Assembling the Appliance’).

STORAGE

WARNING

 – To avoid hazards due to overheating, fire, and electricity, do 

not leave the appliance unattended, when it is connected to the mains power sup-

ply. Do not pull the power cord but grasp the power plug for unplugging the appli-

ance. Power cords may never be knotted, twisted, pulled, strained or squeezed.

1.   Always immediately unplug the appliance, when it is not in use. Then, empty 

and clean the appliance (see: ‘Care and Cleaning’). You may lay the power 

cord loosely around the cord storage at the bottom of the motor base.

2.   Assemble the appliance for storage (see: ‘Operation / Assembling the Appliance’), 

for protecting the parts from damage and loss. 

Only for storage

, you may place 

both filter baskets on each other into the juice collector, before you put in the juicing 

cone. 

However, do not forget to remove one filter basket before next use.

3.   Place the appliance upright on a clean, dry, and stable surface, where it can not 

tip over or fall down. Ensure to store the appliance and all its parts and accesso-

ries, where it is clean, dry and safe from frost, direct sunlight, sharp edges, and 

inadmissible strain (e.g. electric or mechanical shock, fall down/over, moisture, 

high temperature, direct sunlight) and where the appliance and all its parts are 

out of reach of children younger than 8 years and animals

.

CAUTION

 – Do not let the power cord hang down. Ensure that no one will 

pull down the appliance by the power cord. Do not place heavy and/or hard 

objects on or in the appliance or any part of it. Ensure that the press arm is not 

bent, tilted, or jammed for avoiding damage to the joint of the press arm.

Summary of Contents for 61150

















Reviews: