background image

EN

EN

14

15

OPERATION

WARNING

 – 

Always ensure that the appliance and all its parts and acces-

sories are out of reach of children younger than 8 years!

 Do not operate the 

appliance when any parts of the appliance are damaged or leaking. Otherwise, 

liquids may get into the motor base casing risk of electric shock and fire. 

Do not 

attempt to operate the appliance without the juice collector!

 Always unplug the 

appliance, before touching any moved parts (drive shaft or juicing cone).

ASSEMBLING THE APPLIANCE

CAUTION

 – Before operating the appliance, always ensure that the appli-

ance is assembled completely and correctly, according to the following instruc-

tions. 

Do not attempt to use both filter baskets in combination.

 Otherwise, the 

upper filter basket gets damaged. Ensure that no foreign objects are in the appli-

ance (in the top plate of the motor base, juice collector, or filter basket) before 

assembling and/or turning on the appliance.

WARNING

 – Do not place the appliance on inclined or damp or wet sur-

faces. Do not place the appliance on clothes or cardboards for operation to avo-

id risk of electric shock and fire.

1.   Completely unwind the power cord from the cord storage at the bottom of the motor 

base. Place the appliance on a level and dry work space near a sufficient wall power 

outlet (see: ‘General Safety Instructions’). The press arm should face rearward.

2.   Ensure that the press arm is in the top position. The press arm should automati-

cally swing into this position.

3.   Push the juice spout of the juice collector upwards to the closed position. Then 

place the juice collector onto the motor base. For this, the juice spout must fit into 

the semi-circular groove at the front of the motor base. Hold the juice collector 

somewhat tilted for putting it into place at the front part (at the juice spout) first. 

Then, carefully press the juice collector down until it settles in the top plate. For 

this, if required, turn the juice collector a little to and fro.

IMPORTANT - 

The juice collector is assembled correctly, when you cannot lift it 

up at the front (at the juice spout) and there is no gap between the juice collector 

and the top plate all over.

NOTE

Select the filter basket according to your liking. Use the coarse filter basket for maximum 

pulp content in the juice and the fine filter basket for getting the juice as clear as possible.

4.   Insert the desired filter basket (fine or coarse) into the juice collector. If required, turn 

the filter basket until it settles down within the juice collector. The drive shaft protrudes 

the rim of the dark central ring of the filter basket by a little less than 1 inch.

CAUTION

 – 

Always ensure that the appliance is unplugged, before tou-

ching the drive shaft with your hands or assembling the juicing cone.

5.   Place the juicing cone onto the drive shaft and turn it on the drive shaft until it 

slips into position.

IMPORTANT - 

Do not use violence. If the drive shaft or the interior of the juicing 

cone are encrusted with residues of food, the juicing cone may stick at the drive 

shaft and may not slide down correctly. Do not press it down but clean these parts 

first (see: ‘Care and Cleaning’). Do not clean the drive shaft with hard or sharp 

objects. Instead, use a soft damp cloth. With the drive shaft and interior of the jui-

cing cone clean, assemble the appliance.

6.   Insert the fruit dome into the holder at the underside of the press arm by aligning 

the dark shaft on top of the fruit dome with the holder at the press arm. Turn the 

fruit dome until it slides into the centre of the holder. Then grasp the press arm, 

while turning the fruit dome clockwise by approx. 90° for locking the fruit dome 

into position. Ensure that the fruit dome is locked securely and cannot fall.

7.   Open the juice outlet of the juice collector. For this, push the juice spout down 

into the pouring position. The appliance is now ready-to-use.

SQUEEZING CITRUS FRUIT

WARNING

 – Do not attempt to operate the appliance, when it is not assem-

bled completely and correctly. 

Do not operate the appliance without the juice 

collector!

 Otherwise, liquids run onto the top plate of the motor base, causing risk 

of electric shock and fire. Do not let any liquids run under or on the appliance. If 

any liquids ran under or onto the motor base during operation, immediately unplug 

the appliance from the power supply and clean the appliance (see: ‘Care and 

Cleaning’). For operation, always ensure to place a sufficient vessel under the jui-

ce spout and open the juice spout to avoid overflow.

WARNING

 – Do not put or hold your hands or any foreign objects (e.g. coo-

king utensils) into the filter basket or onto the juicing cone, when the appliance is 

connected to the power supply. Do not hold your hands onto the joint of the press 

arm during operation to avoid crushing your hands. Do not operate the appliance 

with two filter baskets assembled to avoid damage.

Summary of Contents for 61150

















Reviews: