65
If ingredients get stuck on the walls of the blender jug turn the appliance off, take the
blender jug off the motorblock, open the lid and push the food down carefully using a
spatula. Take care of the blade.
ATTENTION:
Open the refill aperture when mixing hot food and cover it with a kitchen
towel. This way excess pressure and steam can escape.
OPERATING
WARNING: Ensure the blender jug is locked securely onto the motor-
block and that you can not knock the appliance over during operation to
avoid personal injury.
Connected the plug to the power outlet. Press the Power-button on the far left of the con-
trol panel to turn the blender on. The Power-button will illuminate and flash. The LCD
timer screen will illuminate with ›00‹ displayed. The LCD timer screen shows the running
time of the motor.
1. If the appliance is properly assembled and securely locked onto the motorblock fill the
ingredients into the blender jug. Do not fill the blender jug above the MAX line. When
the blender jug is filled at or near the MAX line place one hand on the blender lid to
avoid displacement of the lid during operation.
IMPORTANT:
Cooked food should cool down before processing. Food with hard
texture should be cut in pieces of 2 cm size before filling them into the blender jug. Fill
liquids in first. Do not overload the blender jug to avoid spilling or overloading the motor.
2. Place the lid on the blender jug and press the lid down to seal the top of the blender
jug. Close the opening of the lid with the refill lid.
Note:
The refill lid has two small guiding pins that fit in the matching gaps of the lid. Twist it
clockwise ¼ of a turn until firmly locked into position. You can hear it click when the
refill lid is in proper position.
Note:
The blender features a patented assist lid. This allows the lid to fit tightly onto the blen-
der jug, avoiding displacement during operation. The ring pull design allows the user
to easily remove the lid with a simple leverage action.
WARNING:
Never take the blender jug off the motorblock, the lid of the blender
jug or place a spoon or other foreign substance into the blender jug while the motor is
running.
