67
Note:
The speed can be changed at any time during the blending process. Each time a
new speed is selected its button will illuminate and the previous speed button illumi-
nation will go out. The number of seconds on the LCD timer screen is not interrupted
and will continue to count upwards to 120 seconds unless interrupted. If changing to
a pre-programme function the LCD timer screen resets to the pre-programmed function
time selected.
ATTENTION:
If the motor slows down or stucks turn the appliance off immediately to
avoid overheating (see ›Trouble shooting‹).
5. Turn the appliance off when the operation is finished.
Note:
Operate the blender only for the appropriate amount of time required – do not over
process.
To stop blending at any time, press the STOP-button or the selected speed button. The
selected speedcontrol button and STOP-button illumination will go out and the Power-
button starts flashing. The appliance is set into the operational mode.
Note:
The Power-button can also be pressed, but this will also turn the appliance off and all
illuminations will go out.
Important:
The blender will automatically stop blending after 120 seconds (2 minutes)
and the function button and STOP-button illumination will go out. The Power-button will
illuminate and flash. This is a safety feature.
6. As soon as the motor stops moving you can take the blender jug off the motorblock
holding on to the handle. Take off the lid to check the consistency of the food or to push
down the food from the sides of the blender jug. You can fill in more ingredients through
the refill aperture. Turn the refill lid anticlockwise and lift it. After adding the ingredients
close the refill aperture, place the blender jug on the motorblock and make sure it is
securely locked. Turn on the appliance. Process until the food has the favoured texture.
7. Turn the appliance off as soon as you are done with operating and take the blender
jug off the motorblock. You can pour out liquid foods.
IMPORTANT:
Do not leave any food dry on the surfaces of the appliance. Always cle-
an the appliance right after use (see: ›Care and Cleaning‹).
