43
Do not touch the appliance or power plug with wet hands, while the
appliance is connected to the power supply.
•
Always unwind the power cord completely for operation to avoid
hazard of overheating, fire and electric shock.
• Do not place or immerse the power base, kettle or power cord in
water or any other liquid. DO NOT spill or drip any liquids on the
power base or the power cord or on the exterior of the kettle to avo-
id risk of fire and electric shock. If liquids run out or are spilled onto
the exterior of the power base or kettle, immediately unplug the appli-
ance. Always wipe off spilled liquids immediately. If in doubt, check
the kettle for leakage, before operating the appliance again. When
parts of the appliance are leaking during operation and/or liquids
accumulate under the power base or run down on the exterior of the
appliance or any part of it, immediately unplug the appliance. Refer
to the instructions in chapter ‘Solving Problems’.
•
Do not place the power base or kettle in an automatic dishwasher.
•
Do not place the power base on a metal surface, or in a large bowl
or tray for operation. If water is spilled or runs out and accumulates,
there would be severe risk of short-cut, electric shock, and fire.
• A cordless water kettle should NOT be filled, while standing on its
power base. Always remove the kettle from the power base for filling
and pouring. For filling, always remove the lid.
HIGH TEMPERATURE – RISK OF BURNS
WARNING:
The Glass Tea Kettle is equipped with electric heating
elements for heating up drinking water. Thus, the appliance could cau-
se severe scalds, burns and damage, when used improperly.
• Always hold the kettle level when it is filled, to avoid spilling. The
appliance and the contents will be hot even for some time after ope-
ration. Always leave the appliance cool down to room temperature,
before cleaning or storing the appliance.
• Even with the lid closed properly, hot steam and splashes of hot water
could escape during operation. Do not hold your face or other parts