48
Note
If you remove the kettle from the power base, before reaching the pre-programmed
temperature or during the steeping time, the appliance cancels the running pro-
gram at once and returns to standby mode.
Note
The maximum water temperature of the keep warm function is limited to 90-95°C,
because water will vaporize quickly, when kept at boiling temperature, causing,
the filling level fall easily below the minimum amount of 500ml. Additionally, kee-
ping the water boiling would rise the energy consumption excessively.
While the keep warm function is running, you may remove the kettle from the power
base, without terminating this function. As a reminder, after approx. 20 seconds a
signal sounds. If you replace the kettle, the “Start/Stop” button flashes.
• To re-assume heating via the keep warm function, press the flashing “Start/Stop”
button shortly. Otherwise, the heating elements do not operate and your water/
tea is cooling down, although the keep warm time is running on.
• If you do not wish to keep the tea/water warm any longer or the filling level
dropped below the MIN filling level (500ml) after pouring, hold the “Start/Stop”
button pressed until the signal sounds. The appliance will return to standby mode
at once.
Note
You should not leave the keep warm function running, if you do not need this
function any longer. Instead, hold the “Start/Stop” button pressed, until the signal
sounds to switch off the appliance. Then unplug the appliance. This will avoid
useless energy loss.
