25
OPERATING THE CITRUS JUICER
Important:
During operation, pulp builds up in the filter basket. Do not allow the
filter basket or juice container to overfill. Otherwise, the juice will not be sufficiently
separated from the pulp. If you process a large amount of fruit, regularly interrupt
juicing and unplug the appliance to let the motor cool down and to empty the fil-
ter basket. Ensure, that the spout will not block during operation. Do not leave any
food dry on the appliance or any parts of the appliance.
WARNING:
Before connecting to the power supply, always ensure, that the
appliance is assembled properly and that there are no utensils in the filter basket.
Do not insert your hands, cooking utensils or any other objects (i.e. hair, clothes,
brushes, tissue) in the filter basket, when the appliance is connected to the power
supply. Do not place the appliance on wet or damp surfaces. Always keep the table
or counter dry and clean. Do not drip or spill any liquids on the motor base or power
cord. Do not place any tissue or similar materials under the motor base to avoid fire
and electric shock. When liquids are spilled over or under the motor base than
immediately unplug the appliance and dry the motor base and the table or counter.
1. Place a jug or a suitable large cup or drinking glass under the spout.
2. Cut the fruit in half, using a sharp knife. It is good advice to cut the fruit at right
angles to the filets.
WARNING:
Do not touch the juice cone with your hands or grasp in the filter
basket while the appliance is connected to the power supply.
3. Plug the power connector into a 220 - 240 V AC wall power outlet.
4. With the cut facing down place a half of your fruit on the juice cone and gently
press down. The juice cone starts rotating and begins the juicing process. For
best results, adjust the hold on the fruit to ensure, that all parts of the fruit flesh are
squeezed and push the juice cone gently and slowly down without violation.
CAUTION:
Do not put excessive pressure on the juice cone. Otherwise the
motor starts getting louder and the speed of the motor decreases during operation.
In addition, the white bitter skins of the fruit will be scraped from the shell. Ensure that
the spout is not blocked during operation. Do not allow the juice container to overfill.
To increase the stability of the jug or cup and to keep your table or counter clean
and dry, you may use suitable coaster.
To prevent dripping and spilling of juice, it is possible to seal the spout during juicing and
collect the juice in the juice container. The juice container has a capacity of max. 200 ml
(1 drinking glass or 1 medium-sized cup).
