Care and Cleaning
WARNING:
To avoid injuries to persons and damage, always switch OFF the appliance,
wait for the motor to stop completely and unplug the appliance immediately after operation
and before laying it down, disassembling or cleaning the appliance. With the appliance
connected to the power supply, do not touch the assembled tools with your hands or any
objects.
DO NOT place the appliance or power cord in an automatic dishwasher. Do
not immerse the motor housing or power cord in any liquids or spill any
liquids on it.
Always wipe off spilled liquids immediately.
CAUTION:
Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants,
bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this could
damage the surfaces. Carefully clean the appliance with a damped sponge or cloth and
warm soapy water.
1. Switch OFF (speed control position ‘0’), wait for the motor to stop completely and unplug
the appliance from the power outlet.
CAUTION:
Always handle with care and without violence. To disassemble the processing
tools, always press the eject button. Do not pull out the processing tools violently.
2. Hold the processing tools over a bowl or sink and press the eject button to remove the
processing tools.
3. Clean the processing tools with a soft nylon washing brush and warm dish-water. Rinse
the processing tools thoroughly under running water.
For your convenience, you may clean the processing tools in an automatic dishwasher (in
the cutlery tray).
Soak stubborn residues on the processing tools in warm dish-water for ca. 10 minutes and
then remove the residues with a soft sponge.
WARNING: Do not place the motor housing or power cord in an automatic
dishwasher.
Do not use any hard or sharp utensils for cleaning. Do not immerse the motor
housing or power cord in water or any other liquid. Do not pour or drip any liquids on the
motor housing or power cord. Do not place the appliance on wet or damp surfaces. When
liquids are spilled on the motor housing, immediately unplug the appliance and dry the
motor housing to avoid risk of electric shock or fire. Always handle with care and without
violence.
4. Wipe the motor housing and power cord with a damp soft cloth. Take care not to spill or
drip water or any other liquids on the motor housing.
5. Thoroughly dry the motor housing and all parts of the appliance after each cleaning.
Leave all parts dry naturally where they are out of reach of young children.
13
40980_Manuel.qxd 08.03.2005 9:14 Uhr Seite 22
