16
II. SAFETY TIPS:
Position on a flat, stable surface.
A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components or service panels on this product.
Consult Local and National Standards to comply with the following:
-
Health and Safety at Work Legislation
-
Fire Precautions
-
IEE Wiring Regulations
-
Building Regulations
-
The appliance is intended for commercial use.
-
DO NOT attempt to service the item yourself.
-
DO NOT use damaged appliances. If you are in any doubt, consult service agent.
-
DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-cream makers etc.), unless
they are of the type recommended by the manufacturer.
-
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
-
DO NOT use mechanical device or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
-
DO NOT damage the refrigerant circuit.
-
DO NOT stand or support yourself on the appliance.
-
DO NOT allow oil or fat to come into contact with the plastic components. Clean immediately if
contact occurs.
-
DO NOT place the appliance near flammable substances.
-
DO NOT use this appliance to store medical supplies.
-
DO NOT use jet/pressure washers to clean the appliance.
-
Always carry, store and handle the appliance in a vertical position and move by holding the base of
the appliance.
-
Always switch off and disconnect the power supply to the unit before cleaning.
-
Keep all packaging away from children. Dispose of the packaging in accordance with the regulations
of local authorities.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
