Magnification Calibration
UltraScan Use
r
’s Guide Reference Series Rev 1.0
2-12
A diffractogram will be calculated (Figure 2-13).
Figure 2-13
Diffractogram
•
Follow the on screen instructions (Figure 2-14)
A red line will appear on the diffractogram.
•
Position the endpoints of the red line on two symmetrical diffraction
peaks (Figure 2-13).
•
Press OK to specify the reciprocal unit and the d-spacing (in the
corresponding real units) in the next window (Figure 2-15).
Figure 2-14
High magnification calibration instructions
