Battery Protection
Protection against Over-Discharge of the Battery. Modern LiPo and
LiFe batteries are very sensitive to over-discharge. If you do not want
to damage the battery and you care about its service life, this
protection is indispensable. The microprocessor monitors the battery
voltage constantly. When the voltage drops down to a critical level,
the Power Module will not allow firing.
Smart Fuse
We have developed an electronic fuse with an accurate current
sensor. A combination of current, voltage and temperature
measurements makes your AEG installation highly reliable. It protects
the MOSFET against overheating, overloading and short-circuiting. If
your airsoft gun becomes jammed, the function protects the motor
and battery against damage.
We know how important reliability is on the battlefield. That's why the
unit has thermal protection. In tandem with a time-lag fuse, it fully
protects your AEG installation.
Electronic Fuse
The
provides you with the opportunity to decide if you
want to use the Active Brake function. If you do not need this, you can
turn it off easily. It will lead to improving the lifespan of your motor.
Power Module
ON/OFF Active Brake
Do you care about realism? Would you like to increase the life of the
gearbox? Does your rifle have such a high rate of fire that you are not
able to make a single shot? The Active Brake sorts things out. In SEMI
Mode, the brake does not allow for compressing a piston after a shot.
The piston will stop in the front position which eliminates
unnecessary stresses, increasing the service life of the gearbox and its
parts. This is important, especially with an AEG power upgrade. After
releasing the trigger, the rifle immediately stops firing. So, you gain
more realism and, additionally, you do not waste your precious
ammunition.
Active Brake
USER GUIDE
10
WWW.GATEE.EU
WARFET
