Ţ
HARDWIRED INSTALATION
Ţ
After a trigger action, the LED
indicator glows yellow. Even
though the motor is connected, the
AEG does not fire.
After connecting the motor to the
Power Module, the AEG starts
firing immediately.
After connecting the motor to the
Power Module, the AEG starts
firing immediately.
The
WARFET
does not react
to any trigger action. The AEG
does not fire.
After a trigger action, the LED
indicator glows yellow. Even
though the motor is connected, the
AEG does not fire.
No contact with the motor.
The motor wires are broken.
The motor windings are broken.
A short-circuit in the
assembly.
switch
The
WARFET
is set on the
Stock Wiring mode.
The
WARFET
is set on the
Stock Wiring mode.
No contact with the Signal Socket.
No contact with the switch
assembly.
A short-circuit or break in the
trigger wire (from the switch
assembly).
The
WARFET
is set on the
Modified Wiring mode.
Clean the Power Module connector.
Check and repair the motor wires.
Repair the motor or replace it with
a new one.
Check and repair the
assembly.
switch
Reprogram the
WARFET
to
the Modified Wiring mode.
Reprogram the
WARFET
to
the Modified Wiring mode.
Clean the Power Module Signal
Socket.
Clean the switch assembly or
replace it with a new one.
Repair the trigger wire or replace it
with a new one.
Reprogram the
WARFET
for
the Stock Wiring mode.
MALFUNCTION
POSSIBLE REASON
WHAT TO DO
23
WWW.GATEE.EU
USER GUIDE
WARFET
