NanoAAB
User Guide
- 6 -
II. Installation
To install the NanoAAB into a standard AEG, we must access the trigger
contacts. In the case of Version 2 gearboxes, the contacts are located inside the
gearbox. With a Version 3 gearbox, installation will be easier because the contacts are
on the outsideof the gearbox. Please consult a local airsoft technician if you have never
disassembled a gearbox before or if you have any installation concerns.
a) Installation of NanoAAB without replacement of wires.
The method below will detail how to install the device in the easiest manner. Using
this method, the original wiring is kept, and the connections are modified. Referencing
Fig. 2, de-solder No. 2 wire from one of the trigger contacts and then solder it to the
No. 1 wire. It does not matter which wire you disconnect from the trigger switches, just
join 2 together at one terminal.
1
2
3
(Fig. 1 – Standard AEG wiring scheme)
