20 -
System Configuration
The 304-SD utilizes a simple three option menu system. Going from Left to Right the Quick Configuration gives access to the
vast majority of required menu options, the basic settings which need to be set for each individual 304-SD for effective
operation.
The second menu, Recorded Video, is for the playback of recorded video from the internal SD card. This video is only viewable
if an external display, or the Interactive Control Display has been connected.
The Third Menu, Advanced Configuration, is more for system administrators and management and involves configuration of
Networks/Wireless/Cellular, etc. as well as advanced settings for Events/Alarms, etc.
Quick Configuration
There are eight sub-menus within the Quick Configuration menu.
Vehicle Number
Within the Vehicle Number menu there are Four Fields, Three of which are user definable.
Unit S/N
This field is set by an encrypted chip from the system board and cannot be changed by
the user.
Company Name
(User Configurable)
Press the ENTER button on the remote control and then select the required characters
from the on-screen menu. The options for input are Uppercase; Lowercase; Numeric and
Symbols. Use the
symbol from the on-screen menu as the backspace key to delete a
character. Once all selections have been made, use the
symbol from the on-screen
menu to exit. Maximum Number of Characters is 8.
Vehicle No.
(User Configurable)
Please Note that this field has a limitation of 8 characters. Press the ENTER button on
the remote control and then select the required characters from the on-screen menu.
The options for input are Uppercase; Lowercase; Numeric and Symbols. Use the
symbol from the on-screen menu as the backspace key to delete a character. Once all
selections have been made, use the
symbol from the on-screen menu to exit.
Driver/Route Name
(User Configurable)
Please Note that this field has a limitation of 8 characters. Press the ENTER button on
the remote control and then select the required characters from the on-screen menu.
The options for input are Uppercase; Lowercase; Numeric and Symbols. Use the
symbol from the on-screen menu as the backspace key to delete a character. Once all
selections have been made, use the
symbol from the on-screen menu to exit.
