- 25 -
In the example on the right, Channels 1 and 2 of the file timed at
09:08:24 have been selected for Exporting to an external USB drive. Use
the remote control to Arrow over to the SEL area of the required file and
press Enter. This will place an X in the SEL column. If you require the SEL
below to also be checked use the Down arrow on the remote control to
highlight and then press Enter.
With the required Channels for the files selected use the Right arrow on
the Remote Control and move to the right-hand column Ensure that there
is a USB drive, with sufficient capacity, connected to the front of the 304-
SD and navigate to EXPORT Press Enter on the Remote control.
Figure 14: Selecting Files to Export.
Once the Enter button on the remote control has been pressed a status
window will appear.
The status window displays the Total number of files being exported, TOTAL=2,
and which file is currently being exported, NO.=1 in the example on the right.
A percentage bar displays a graphical representation of this information.
Once File 1 has completed, File 2 will automatically begin to download to the
external USB drive
Once all files have been downloaded to the USB drive a message will appear
stating that backup has been successful.
The exported video files will be in a folder on the USB drive USERID
Record
File.
USERID will be the same as the USERID displayed when entering the Configuration screens.
Figure 15: Export Status.
Event Files.
Video files which have had an Alarm Action or Event associated can be exported to an external USB drive by using the Event
Files menu option under Recorded Video. The Event Files search is very similar in use to All Files.
Once Event Files has been selected an Event Search window will appear. This
window allows for the selecting of File Type, e.g. Panic Button (Driver Alert
Button) and a specific date. As with All Files, the Calendar at the top of the
screen will have dates highlighted if they contain Event Markers.
DATE: will always display the current days date. This date can be changed by
using the remote control to enter the required date for the Event File required.
Figure 16: Event Search Dialog Window.
