30 -
SYSTEM LOG
Within System Log there are two options; Export System Log and Delete System
Log.
Export System Log:
Exports the System log to an external USB drive connected
to the front of the 304-SD.
Delete System Log:
Deletes the System Log. If selected a confirmation window
will appear.
GEO FENCING
Reserved for Future development.
RECORD
Options
There are two pages of Preferences within the Record Options menu.
Figure 21: Record Options
Options 1.
Video Type
Options: NTSC or PAL
Default: NTSC
Record Mode
Options: General; Timer or Event.
General:
The 304-SD will begin recording upon power up.
Timer:
The 304-SD will begin recording at the time specified in the Timer Record
menu based on the schedule
Event:
When an Event has been triggered the 304-SD will record. To set an Event to
record go to Advanced Configuration
System
Event to set triggers.
Default: General
Normal Rec Rate
Options: Normal or I Frame.
Normal
The 304-SD will begin to record according to the configuration of the settings
in the Record Setting menu.
I Frame
The 304-SD will begin recording at 1 frame per second to conserve disk space,
however, if an event is triggered the 304-SD will record at the frame rate
specified within the Record Setting menu.
Default: Normal
Alarm Pre-Rec
Determines the length of the file before and after an Event has been triggered, e.g. if Alarm
Pre-Rec Time is set to 30 minutes an Event which was triggered at 10:00am would
generate a saved file showing video from 9:30am to 10:30am.
Alarm Duration
Determines the duration for which an Alarm will record.
Alarm Post Rec
Determines the duration for how long an Alarm will record for after it has been activated it.
Alarm Time
When Alarm has been triggered, duration time of the Alarm.
