40 -
Info
Version
Displays the current version of Firmware installed on the 304-SD.
The SD Total Capacity; Amount of Available free space and total recording time, in hours, still available.
History Info.
History Info display information for the following four items, all of which can be reset to zero by highlighting the CLEAR button
and then pressing the ENTER button on the remote control.
The four values are: Highest Speed; Total Mileage; Lowest Voltage and Highest Shock.
Modules
Modules displays system status
information. In Figure 26 GPS has
been set to ON on its configuration
page but the GPS is displaying as
Invalid. This allows for troubleshooting
to be undertaken, e.g. check the GPS
connection on the rear of the 304-SD;
Incorrect mounting of the GPS
module, etc.
Figure 28: System Status.
