24
OPTIONS 2.
METADATA CAPTURE
Reserved for future development
MIRROR SD CARD POSITION
Options: External/Internal
EXTERNAL
Reserved for future development
INTERNAL
Reserved for future development
MIRROR REC. TO SD CARD
Options: ON / OFF
OFF
No Backup created
ON
Backs up video files to Internal SD card.
HDD / SD OVERWRITE
Options: ON / OFF
ON:
When the Hard Disk Drive has less than 8G, the 816-HD will begin to
delete the oldest recorded files until the HDD available space is equal
to, or over 15GB. Alarm files will remain as they are in a locked state.
OFF:
816-HD will stop recording when HDD is full, (less than 500MB). You
must replace the HDD or delete files manually for the 816-HD to
begin recording again.
Default: ON
LOCKED FILE RETENTION(DAY)
Options: 7, 10, 15, 20, 30, 45 days.
Determines the length of time, in days, which a recorded file triggered by an
alarm will be “Locked”, Read-Only. Once the specified amount of time has elapsed
the file can be deleted.
Default: 15
PRE-RECORDING SWITCH
Options: ON / OFF
When set to ON allows for EVENT based recording to capture a set amount of
time, (ALARM PRE-REC. TIME), prior to when the EVENT was generated.
ALARM PRE-REC. TIME(1-60)MIN
Determines the length of the file before and after an Event has been triggered,
e.g. if Alarm Pre-Rec Time is set to 30 minutes an Event which was triggered at
10:00am would generate a saved file showing video from 9:30am to 10:30am.
OSD OVERLAY
The OSD Overlay options controls what will be displayed on the On Screen Display and Recorded Video. The value can
either be ON or OFF, except for position which has a TOP or BOTTOM option.
LIVEVIEW controls what will be visible when the output of the 816-HD is viewed either via the ICD accessory, or, the RCA
output connection on the front of the Digital Video Recorder.
If IMAGE is set to ON then the recorded video will display this information as part of the playback when viewed via G4
Viewer.
ITEMS
LIVEVIEW
IMAGE
POSITION
DATE/TIME
ON/OFF
ON/OFF
TOP/BOTTOM
ALARM
OFF/TRIGGER/FIXED
ACCEL. DATA
ON/OFF
TEMPERATURE
ON/OFF
FIRMWARE VERSION
ON/OFF
GPS INFO
OFF/TRIGGER/FIXED
CH NAME
ON/OFF
VEHICLE NO.
FIXED/OFF/TRIGGER
ON/OFF
