26
MIRROR RECORD SETTINGS.
Mirror Record Settings allows for backing up from the COMRAD™ to the SD
card. Due to the potential Gigabyte size difference between the COMRAD™
and SD card specific channels can be chosen to backup.
For example, if STOP ARM recordings are to be backed up and Channel 3 has
been set to be the Stop Arm camera, then Channel 3 should be set to ON in
Mirror Record Settings and all other channels set to OFF. This will ensure
maximum amount of disk space on the SD card to be available for Mirroring.
A maximum of 8 channels can be set to mirror to the SD card.
SUB STREAM
RESERVED FOR FUTURE DEVELOPMENT.
SCHEDULE
DATE
OPTIONS:
Single Day:
EVERY:
WKD:
******:
Select a day of the week for the schedule to run.
Applies a schedule to every day of the week
Runs the schedule based on the days selected in Workday From
Suspends the selected schedule.
SCHEDULE 1
00:00-00:00
Input the Start Time and End time for the scheduled recording.
TYPE
OPTIONS:
BD:
MD:
NORMAL:
ALARM:
Reserved for future development.
Reserved for future development.
The 816-HD will record as normal.
The 816-HD will record Events ONLY during the time specified in
the schedule.
SCHEDULE 2
00:00-00:00
This defines the schedule for a second cycle on the same day if
required.
TYPE
OPTIONS:
BD:
MD:
NORMAL:
ALARM:
Reserved for future development.
Reserved for future development.
The 816-HD will record as normal.
The 816-HD will record Events ONLY during the time specified in
the schedule.
