Additional
configuration
22
23
- If card key is not entered within 7 seconds of
pressing the button for registration, the input is
canceled.
Enter the card key within 7 seconds of number pad
being lighted.
Press button again
(You may stop contacting the 9V battery if the operation
of the motor is finished.)
Customer Support
Customer Support
How to supply the emergency power in case of battery discharge
Things to check before you ask for the service
When you have a trouble while using the product, please check the following problems and solutions first
You can open the door by contacting the 9V battery
Selection Order
Operation
Movement
Function Description
How to supply the emergency power
How to replace the battery
Contacting
the 9V battery
Touch with a palm
Enter the passcode
Press the button
After open the emergency cover, contact the 9V batter
to the emergency power supply terminal
Lightly touch the outside keypad with the palm
Enter the passcode
( The battery life can vary depending on temperature, humidity, the number of uses, and the quality of the battery.)
Battery life expectancy
The product uses 4 of 1.5V AA alkaline batteries,and
can use about 1 year if you use it 10 times a day
(Please use the authentic alkaline batteries)
1:1 The actual size
1.5V AA alkiline battery
Battery Replacement Notification Alarm
Batteries should be replaced when battery
replacement lamp of outside part is lit, a red
light is on in the battery replacement lamp of
inside part, warning melody (real music part)
rings, or voice guide is sounded.
You should replace all 4 batteries at once.
Caution
Problem
Solution
Standard
Operation
Keypad
Card Key
There is no power.
- Check whether the batteries are installed correctly,
and (+) and (-) of the polarity is correctly put in.
- Check whether the batteries are discharged or
defect.
It stops working right after it
starts to work.
- The batteries do not have enough power.
So, replace the batteries.
Registered card key and
passcode are authenticated,
but the door does not open.
- Check to see if there is any other lock device.
- There may be foreign materials between the door
and doorframe, so check on the space between
the door and doorframe.
- If an error sound is played and the door is not
opened after authentication, then the reason may
be the door lock stuck in the latch, so re-try after
checking the door.
Card key cannot be registered.
Open/close button on the
inside does not work.
(auxiliary key limited)
- Manual switchgear on the inside can be turned to
the open position to open the door.
- When it is in the internal forced lock condition,
then disable the forced lock and then operate it.
- When the batteries are discharged, open/close
button may not be operated, so please change
the batteries.
Cannot register the passcode.
- The registration will be cancelled 7 seconds after
pressing button. You should enter passcode
within 7 seconds while the keypad is lit.
- or can't be used as passcode
- Passcode can be registered from 4 digits to
12 digits only.
Please check on (+) and (-) terminal before you place the batteries.
Please be careful to place the battery with right position because if you place in a
reverse way, it will cause leakage or breakage.
Once the battery life is done, replace all the batteries, and do not mix and use the
unused battery with the used or being used batteries.
