Reference
Reference
Press button
for 5 seconds
14
15
Press the
button (menu)
Press the
button (menu)
Setting Up
Setting Up
Manual Switchgear Alarm Sound Features
Forced lock feature
Volume Control Feature
How to set the manual switchgear alarm sound
To control volume
Setting the external forced lock - Card
Setting the external forced lock - Password
After opening the interior battery cover press the
button (menu)
Contacting the card
key for 5 seconds
Contact the registered card key in the card key
touch area for at least 5 seconds.
(Beep sound is played 3 times.)
Press the 0, and then the 8 button on the keypad
sequentially.
Press the button (menu) in the interior again.
Press the 0, 8 button
on the keypad
This feature allows control over all of the sounds made by the product
Selection Order
Operation
Movement
Function Description
Selection Order
Operation
Movement
Function Description
Selection Order
Operation
Movement
Function Description
Selection Order
Operation
Movement
Function Description
Based on the volume switch setting, the operation
volume is controlled.
(2: Loud operation volume / 1: Low operation volume / 0: Operation volume muted)
To control volume switch
The product’s initial setting is to not produce an alarm sound from opening or closing the door via
manual switchgear, but depending on the user convenience, it can be set to play an alarm sound.
For each use, the alarm sound setting and disabling for the manual switchgear is repeated.
When the external forced lock is enabled, an intrusion alarm will sound when the door is open
from the inside by manual opening and closing device.
Touch with palm
Lightly touch the key pad with a palm
Enter the passcode
Enter the registered passcode
Press button for 5 seconds
(There will be 3 beeping sounds.)
