background image

SURFACE FIXED DIGITAL 

GATE LOCK

A marine grade Digital Gatelock with many unique features.

PRODUCT DETAILS

Product code:     Description:

 

DGLWL 

 

Left handed, double sided (keypad on both entry and exit side)

DGLWR  

Right handed, double sided (keypad on both entry and exit side) 

DGLSWL 

Left handed, single sided (keypad one side, handle other side)

DGLSWR 

Right handed, single sided (keypad one side, handle other side)

Latchbolt: 

Adjustable, moves 22mm (7/8"). Auto-latching when gate closes.

Keep included. 
No power needed.

INSTALLATION

1.  Position angle bracket on edge of the gate (can overhang edge of gate by up 

to 15mm (9/16") if required to accommodate a gap between the gate and gate 

post) and mark 3 holes for the outside keypad fixing screws and spindle. Remove 

angle bracket and drill 3 holes 9.0mm (3/8") diameter through the gate.

2.  Cut the 2 x M5 screws and the spindle to length to suit the gate thickness. M5 

screws should be cut to gate thickness less 16mm (5/8").  The spindle should be 

cut to gate thickness plus 68mm (2-5/8") for double sided and plus 82mm (3-

1/4") for single sided.

3.  Fit the outside keypad and angle bracket using M5 screws and insert spindle 

(Ensure spindle is not binding on the gate).

4.  Fix angle bracket securely using screws through the remaining 2 countersunk 

holes.

5.  Position lock on to the spindle and fix to the angle bracket using 2 x M8 

countersunk screws.

6.  Test the lock to check it operates freely.

7.  Fix the strike plate to the gate post. 

8.  ADJUSTMENT

 

To adjust latchbolt length insert 3mm (1/8") long arm hex key 

(supplied) into end of bolt and release locking screw.  Rotate bolt as required and 
re-tighten locking screw. Lubricate with light oil periodically.

© Copyright Gatemaster 2022

SPECIFICATION 

SHEET 

DGLW

+44 (0)1243 558 580

www.gatemasterlocks.com

VISIT GATEMASTERLOCKS.COM FOR MORE 

INFORMATION

RIGHT HAND 
LOCK SHOWN

Installation video

Auto-latching – close the gate and the latchbolt latches into 
the gate frame.  To open the gate - enter the code and turn 
the handle.

No power needed – High quality digital keypads ensure long 
lasting durability. 

Latchbolt is adjustable in length for precise fitting on site.

Reviews: