EM5 ULTRA Setup
Page 6
2:
EM5 ULTRA Setup
The EM5 ULTRA requires complete and thorough setup prior to use.
Preparing the SmallHD ULTRA 5 LCD
✓
Auto boot.
Setup the ULTRA 5 LCD to boot when power is present at the rear
connector.
MENU
→
POWER
→
AUTO RECOVER
→
ON
✓
Pages.
for details on the ‘Pages’ feature. The
LCD will boot into a default page that must be set, as follows:
* With the LCD on, navigate to the ‘page’ you wish to use as default with your Gates
camera housing.
* Turn off the LCD via the POWER button. Then power back on. This ‘sets’ this
page as default for any auto boot.
Set Auto Recover here
