EM5 ULTRA Setup
Page 8
Insert ULTRA 5 LCD into to Rear Shell
✓
First, connect video and power connectors
as shown. Then seat into the rear
shell.
✓
Make a visual check to verify the orange o-ring
is clean and free of any foreign
matter.
✓
Install the front cover.
✓
Tighten fours screws
as shown in the image below. Use a cross-pattern, and DO
NOT OVERTIGHTEN.
Then insert the ULTRA 5 LCD
into the rear shell. It will mate
flush. Inspect the o-ring is
clean.
Mate the front shell and
tighten 4 screws. DO
NOT overtighten.
First, connect
power and video
connectors
here.
