Intraplex NetXpress IP Multiplexer
4—System Configuration and Operation
Version 3.05
4-44
GatesAir, Inc.
Intraplex Products
that the router is configured for a one-minute IGMP general query interval, which is the default for most
routers.)
Enable IGMP Logging:
Only
select this check box
at a request of GatesAir technical personnel
, as this
feature is for debugging known issues. Selecting this check box enables the network driver to capture the
IGMP messages.
Enable Auto-Negotiation:
Controls auto-negotiation state for the port. Default is enabled.
Enable ICMP Error Blocking:
Controls enabling/disabling of ICMP error messages on WAN port.
Use LAN as Redundant WAN Link:
When selected, LAN port acts as redundant WAN port. When not
selected, the port acts as a normal data port.
Port Speed:
Speed of the interface (10 or 100 Mbps). Read-only.
Port Duplex State:
Duplex mode (full or half). Read-only.
Submit:
Click this button to apply configuration changes.
Figure 4-44 shows configuration on the LAN interface.
Figure 4-44. LAN Network Interface Configuration Page
Static IP Address:
This field defines the IP address to use for this interface.
Static Netmask:
This field defines the subnet mask to use for this interface.
Allow SNMP:
Whether SNMP traffic is accepted on this interface.
Allow HTTP:
Whether HTTP traffic is accepted on this interface.
Allow FTP:
Whether FTP sessions are accepted on this interface.
Allow Telnet:
Whether Telnet sessions are accepted on this interface.
Enable Auto-Negotiation:
Controls auto-negotiation state for the port. Default is enabled.
Mirror the WAN interface:
When selected, LAN port acts as redundant WAN port. When not selected,
the port acts as a normal data port.
Port Speed:
Speed of the interface (10 or 100 Mbps). Read-only.
Port Duplex State:
Duplex mode (full or half). Read-only.
Submit:
Click this button to apply configuration changes.
4.4.4.2 IP Routing Table
Review, create, and edit IP route information for all traffic associated with your Intraplex NetXpress IP
Multiplexer on the
IP Routing Table
(Figure 4-45). Point to
Networking
and click
Forwarding
. Default
Summary of Contents for Intraplex NetXpress
