5 – Configuration Using IntraGuide
T1 CrossConnect Installation & Operation Manual
Version 2
GatesAir
5-11
Intraplex Products
5.3.4.4 RBS Control Tab
The
RBS Control
tab allows you to select any time slots on a port to have robbed-bit signaling (Figure
5-13). To set a time slot for RBS, perform these steps:
1.
Click the
RBS Control
tab.
Figure 5-13. RBS Control Tab, Configuration Pane
2.
Select the time slot or time slots to enable robbed-bit signaling.
3.
Click
Apply Now
to apply the RBS.
5.3.4.5 Secondary Port Control Tab
The
Secondary Port Control
tab allows you to select any ports to set as secondary for the primary
port (Figure 5-14). All signals go to the primary port first. If it’s busy, the signals are rerouted to the
selected port.
Summary of Contents for Intraplex T1 DCS-9530 CrossConnect System
Page 2: ......
