Installation
5
Installing the cabinet mounting rails
To install the cabinet mounting rails:
1
Slide the inner rail forward, then align the back end of the cabinet
mounting rail to the back mounting bracket. (If the spring latch locks
the inner rail into place, free the rail by releasing the spring latch.)
2
Attach the back end of the cabinet mounting rail to the back mounting
bracket using two screws with washers and nuts from the accessory kit.
One screw must be located in the last back bracket screw hole. The second
screw can be located in any of the other back bracket long screw holes.
3
Align the front of the cabinet mounting rail to the front mounting
bracket.
Spring latch
Back mounting bracket
Inner rail
8507329.book Page 5 Thursday, February 15, 2001 10:33 AM