90 Maintaining and Troubleshooting the Gateway ALR 7200 Server
Memory errors were
detected while the system
powered up.
See “Memory errors were detected during
system start up.” on page 77.
Memory size error.
Enter BIOS Setup and save the memory
configuration.
Non-system disk or disk
error.
•
Eject the disk and press
ENTER
.
•
If the disk is bootable, check it for errors.
Not enough memory.
Close all programs that are not currently in
use.
Print queue is full.
•
Wait until the current print job has
completed before sending another print
job.
•
If you receive this error often, you need to
add memory to the printer.
Printer is out of paper.
•
Add paper to the printer.
•
Make certain the printer is online.
Required parameter
missing.
•
Make certain you entered the right
command.
•
If you are trying to exit MS-DOS to return
to Windows, type
exit
and press
ENTER
.
Syntax error.
•
Make certain you entered the right
command.
•
If you are trying to exit MS-DOS to return
to Windows, type
exit
and press
ENTER
.
Time and date not set.
Enter BIOS Setup to set the system’s date
and time.
Write protect error.
Move the write-protection tab over the hole
on the back of the disk.
Error Message
Solutions
3436.book Page 90 Friday, August 7, 1998 10:23 AM
