22 Maintaining and Troubleshooting the Gateway ALR 7200 Server
7.
Slide the cartridge all of the way down until it is firmly seated.
Figure 7: Installing the Pentium II Processor
8.
If the processor cartridge does not already have the heatsink attached
to it, attach the heatsink according to the instructions that came with
the processor upgrade kit.
9.
Replace the lock bar on the processor support and secure it with the
two screws that you removed earlier.
10.
Set the jumpers for the new processor configuration (see Table 1 on
page 25).
11.
Close the case, as described in Chapter 1.
12.
Reconnect the power cord and turn on the system.
3436.book Page 22 Friday, August 7, 1998 10:23 AM
