42
Gateway ALR 7200R User’s Guide Supplement
Invalid password.
•
Enter your password again, making certain
to enter it correctly.
•
If you do not know the password, you may
need to reinstall the software you are trying
to access.
•
Startup passwords are stored in BIOS. If this
password has been set and is unknown, you
may be able to reset the password via
system board jumper settings. Refer to the
Maintaining and Troubleshooting Guide for
more information.
Keyboard clock line failure.
•
Try a working keyboard.
•
Make certain the keyboard is compatible with
the system. You may have to change the
switch setting to AT.
•
Replace the keyboard chip.
Keyboard controller failure.
•
Try a working keyboard.
•
Make certain the keyboard is compatible with
the system. You may have to change the
switch setting to AT.
•
Replace the keyboard chip.
Keyboard controller failure.
•
Try a working keyboard.
•
Make certain the keyboard is compatible with
the system. You may have to change the
switch setting to AT.
•
Replace the keyboard chip.
Keyboard not detected.
•
See “The keyboard doesn’t work.” on
page 36.
•
Turn off the system and check the keyboard
cable.
Keyboard stuck key failure.
•
Remove any objects that may be resting on
the keyboard, and then restart the system.
•
Check for sticky keys. Clean the keyboard if
necessary.
Memory errors were
detected while the system
powered up.
See “Memory errors were detected during
system start up.” on page 31.
Error Message
Solutions
3437.boo Page 42 Wednesday, October 7, 1998 4:01 PM
