8 Maintaining and Troubleshooting the Gateway ALR 8200 Server
4.
Slide the panel forward until it is locked into place.
5.
Secure the panel with the screws you removed earlier.
Reinstalling the side panel
1.
Align the panel with the chassis ledges just a few inches off towards
the back of the chassis. (See Figure 6.)
Figure 6: Reinstalling the Side Panel
2.
Verify that the slots on the panel are aligned with the locking tabs on
the chassis.
3.
Slide panel towards the front of the system until the panel is locked
into place.
4.
Secure the panel with the screws you removed earlier.
4079tl.book Page 8 Tuesday, December 22, 1998 2:04 PM