32 Maintaining and Troubleshooting the Gateway ALR 9000 Server
Numlock
•
Numlock sets the power-on state for the Numlock key to Auto, On, or
Off.
•
Key Click, when
[Enabled]
, will cause your system’s speaker to click
whenever you press a key.
•
Keyboard Auto-repeat Rate determines at which rate a character will
repeat if you hold down a key on your keyboard. The options are 2/sec,
6/sec, 10/sec, 13.3/sec, 18.5/sec, 21.8/sec, 26.7/sec, and 30/sec.
•
Keyboard Auto-repeat Delay determines the amount of delay before a
depressed key repeats. This can be set to 1/4 second, 1/2 second, 3/4
second, and 1 second.
System Memory
This parameter reflects the current amount of memory installed in your system. If
you have changed your memory configuration, make sure you save this new value
before exiting the system BIOS. System Memory is automatically configured by
the system and cannot be changed.
Extended Memory
This parameter reflects the current amount of extended memory in your system. If
you have changed your memory configuration, make sure you save this new value
before exiting the system BIOS. Extended Memory is automatically configured by
the system and cannot be changed.
Maints.boo Page 32 Friday, July 10, 1998 1:47 PM
