Adding or replacing memory
57
4
If you are removing a DIMM from the
memory module bank, gently pull the
plastic tabs away from the sides of the
memory module and remove it.
- OR -
If you are adding a DIMM to an empty
memory module bank, gently pull the
plastic tabs away from the sides of the
memory module bank. Make sure that you
install modules of the same type into both
slots of a memory channel (bank).
5
Align the notches on the new DIMM with
the notches on the memory module bank,
then press the module firmly into the bank.
The tabs on the sides of the memory
module should secure the memory
module automatically. When the module is
secure, you hear a click.
6
Return your computer to its upright
position.
7
Replace the side panel by following the
instructions in “Replacing the side panel”
on page 55.
8
Reconnect the cables and the power cord.
9
Turn on your computer. Windows starts
and the Windows desktop appears.
8511781.book Page 57 Tuesday, October 10, 2006 4:41 PM
