background image

CHAPTER 3: Setting Up and Getting Started

14

Sitting at your computer

Avoid bending, arching, or angling your wrists. Make 
sure that they are in a relaxed position when you type.

Do not slouch forward or lean far back. Sit with your back 
straight so your knees, hips, and elbows form right 
angles when you work.

Take breaks to stand and stretch your legs.

Avoid twisting your torso or neck.

Avoiding discomfort and injury from repetitive 
strain

Vary your activities to avoid excessive repetition.

Take breaks to change your position, stretch your 
muscles, and relieve your eyes.

Find ways to break up the work day, and schedule a 
variety of tasks.

Preparing power connections

Protecting from power source problems

During a power surge, the voltage level of electricity coming 
into your computer can increase to far above normal levels and 
cause data loss or system damage. Protect your computer and 
peripheral devices by connecting them to a 

surge protector

which absorbs voltage surges and prevents them from 
reaching your computer.

An 

uninterruptible power supply

 (UPS) supplies battery power 

to your computer during a power failure. Although you cannot 
run your computer for an extended period of time with a UPS, 
a UPS lets you run your computer long enough to save your 
work and shut down your computer normally.

Warning

High voltages can enter your computer through both the power cord and 

the modem connection. Protect your computer by using a surge protector. If you 
have a telephone modem, use a surge protector that has a modem jack. If you 
have a cable modem, use a surge protector that has an antenna/cable TV jack. 
During an electrical storm, unplug both the surge protector and the modem.

8513027.book  Page 14  Friday, April 25, 2008  5:27 PM

Summary of Contents for GT5694































































































































Reviews: