Replacing the Wireless Network Module
Technical Support
See the label on the bottom of the notebook for Customer Care Information. See
your
Reference Guide
for important safety, regulatory, and legal information.
© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
or registered trademarks of Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
9
Unplug the two or three antenna cables. Note which color cable
is connected to each of the connectors.
10
Move the antenna cables out of the way.
11
Remove the screws securing the wireless network module.
12
Pull the module out of the slot.
13
Hold the new module at a 30-degree angle and insert it into the
empty slot. This module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that the notch in
the module lines up with the tab in the module slot.
14
Move the antenna wires out of the way.
15
Replace the screws removed in
Step 11
.
16
Reattach the antenna cables to the connectors.
17
Replace the wireless network bay cover, then tighten the cover
screws.
18
Insert the battery, then turn your notebook over.
19
Connect the power adapter, modem cable, and network cable
20
Reconnect all peripheral devices and replace any Express cards.
Screw
Screw
2
