background image

www.gateway.com

83

5

If you have enough blank discs of the specified type, 
click 

I have enough discs

, then click 

Next

. If you do 

not have enough discs, choose a different disc type, or 
click 

Cancel

.

The disc recording begins. Label the discs as they are 
completed.

6

If multiple discs are required, insert the additional blank 
disks when prompted. 

7

When the process is finished, the 

Congratulations! 

window opens.

8

Click 

Finish

.

9

Remove your final disc, then label all of the discs and 
store them in a safe place.

Important

Use a permanent marker to label each disc “Software and Driver 

Recovery,” along with a short description of which notebook the discs 
are for. If you are recording multiple discs, as you remove each disc 
from the drive, use the marker to label each disc 

1 of 

x

2 of 

x

3 of

x

and so on.

Tip

After a recovery disc is created, your notebook names the disc 

Recovery13

 for disc 1 of a 3-disc set, 

Recovery23 

for disc 2, and 

so on.

Summary of Contents for M-7301U





































































































































































Reviews: