background image

CHAPTER

6

: Traveling with Your Notebook

70

Packing your notebook

Remove all peripheral devices and cables. Remember to 
pack those you will need while traveling.

Pack your notebook securely into a briefcase or 
hand-carried luggage, and keep it separate from 
toiletries, liquids, and food. Do not pack it in checked 
luggage.

Keep your notebook stable during travel. Secure it to 
prevent it from sliding around in overhead bins and car 
trunks.

Traveling by air

Do not check your notebook as luggage.

Charge the battery in case airport security asks you to 
start your notebook.

Have your notebook hand-inspected or sent through 
the X-ray scanner, but never carry it through the metal 
detector.

Turn off you notebook for takeoff and landing.

Turn off all wireless devices while in the aircraft.

Dial-up modem

Take a telephone cord to connect the modem to 
telephone jacks. If you are traveling internationally, take 
telephone jack adapters or an acoustic handset coupler.

Take a telephone line protector.

Take a telephone line tester to check for unsafe lines, 
especially if you are traveling internationally.

Take remote access information with you so you can 
connect to your ISP while outside of your usual calling 
area. A list of country dialing codes may be especially 
useful if you are traveling internationally.

Summary of Contents for M-7301U





































































































































































Reviews: