54
Chapter 4: Maintaining
www.gateway.com
Adding memory
Your tablet comes installed with 256 MB of memory. Additional memory helps
improve tablet performance and increase battery life.
To add memory:
1
Turn off the tablet, unplug the power, and remove the battery.
2
Ground yourself by touching the tablet or another grounded appliance.
3
Remove the two screws from the L-shaped cover on the back of the tablet.
4
If you are removing a module, release the clips on each side of the memory
module. The memory module lifts up to a 25-degree angle for easy removal.
Warning
To avoid the risk of personal injury or damage to the tablet,
when performing the following tasks, turn off your tablet,
unplug the AC power connection, and remove the battery.
Ground yourself by touching the tablet. Avoid touching the
pins and leads on the memory and the internal circuitry of
the tablet.
