www.gateway.com
63
5
Insert the retaining tabs of the new keyboard into the slots located on the
top side of the touchpad area.
6
Reach underneath the keyboard and insert the keyboard cable to its system
board connector, then close the clip to lock the cable in place.
7
Gently press the keyboard down until it is flat all the way across.
8
Reinstall the keyboard cover by performing steps
9
–
13
of the
“Replacing the
keyboard cover”
procedure on
page 58
.
9
Reinstall the battery.
Important
The keyboard cable is correctly oriented if it is not twisted.
Summary of Contents for NV-53
