manualshive.com logo in svg

Gateway Solo 5350, User Manual

The Gateway Solo 5350 is a remarkable laptop designed for optimal performance. To easily navigate your way through its advanced functionalities, ensure to download the comprehensive User Manual for free from our website. Discover all the details and unleash the full potential of this powerful device at your fingertips.

Share
Download
background image

287

Regulatory compliance statements

www.gateway.com

Telecommunications per FCC part 68 
(applicable to products fitted with USA modems)

Your modem complies with Part 68 of the Federal Communications Commission (FCC) rules. On 
the computer or modem card is a label that contains the FCC registration number and Ringer 
Equivalence Number (REN) for this device. If requested, this information must be provided to the 
telephone company.

An FCC-compliant telephone line cord with a modular plug is required for use with this device. 
The modem is designed to be connected to the telephone network or premises wiring using a 
compatible modular jack which is Part 68-compliant. See installation instructions for details.

The Ringer Equivalence Number (REN) is used to determine the number of devices which may be 
connected to the telephone line. Excessive RENs on a telephone line may result in the devices 
not ringing in response to an incoming call. In most areas, the sum of RENs should not exceed 
five (5.0). To be certain of the number of devices that may be connected to a line, as determined 
by the total RENs, contact the local telephone company.

If this device causes harm to the telephone network, the telephone company will notify you in 
advance that temporary discontinuance of service may be required. The telephone company may 
request that you disconnect the equipment until the problem is resolved.

The telephone company may make changes in its facilities, equipment, operations, or procedures 
that could affect the operation of this equipment. If this happens, the telephone company will 
provide advance notice in order for you to make necessary modifications to maintain 
uninterrupted service.

This equipment cannot be used on telephone company-provided coin service. Connection to 
party line service is subject to state tariffs. Contact the state public utility commission or public 
service commission for information.

When programming or making test calls to emergency numbers:

■

Remain on the line and briefly explain to the dispatcher the reason for the call.

■

Perform such activities in the off-peak hours such as early morning or late evenings.

The United States Telephone Consumer Protection Act of 1991 makes it unlawful for any person 
to use a computer or other electronic device to send any message via a telephone fax machine 
unless such message clearly contains, in a margin at the top or bottom of each transmitted page 
or on the first page of the transmission, the date and time it is sent, an identification of the 
business, other entity, or other individual sending the message, and the telephone number of the 
sending machine or such business, other entity, or individual. Refer to your fax communication 
software documentation for details on how to comply with the fax-branding requirement.

Summary of Contents for Solo 5350



























































































































































































































































































































Reviews:

No comments

Related manuals for Solo 5350

Acer AcerNote Light 370P Safety Instructions preview
AcerNote Light 370P
Brand: Acer Pages: 16
Panasonic ToughBook CF-72 Series Operating Instructions Manual preview
ToughBook CF-72 Series
Brand: Panasonic Pages: 68
Panasonic Touchbook CF-50 Series Reference Manual preview
Touchbook CF-50 Series
Brand: Panasonic Pages: 56
Panasonic Toughbook CF-T8EWATZJM Reference Manual preview
Toughbook CF-T8EWATZJM
Brand: Panasonic Pages: 133
Panasonic Toughbook CF-T8EWATZJM Operating Instructions Manual preview
Toughbook CF-T8EWATZJM
Brand: Panasonic Pages: 40
Panasonic Toughbook CF-31AGP7B2M Operating Instructions Manual preview
Toughbook CF-31AGP7B2M
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-H1ADBAZCM Reference Manual preview
Toughbook CF-H1ADBAZCM
Brand: Panasonic Pages: 113
Targus Chill Mat Quick Start preview
Chill Mat
Brand: Targus Pages: 4
Targus Chill Mat Quick Start Manual preview
Chill Mat
Brand: Targus Pages: 2
Acer TravelMate 420 Guía Del Usuario preview
TravelMate 420
Brand: Acer Pages: 80
Acer TravelMate 4210 Manuel D'Utilisation preview
TravelMate 4210
Brand: Acer Pages: 87
Acer TravelMate 420 Guia Do Utilizador preview
TravelMate 420
Brand: Acer Pages: 82
Acer TravelMate 4100 Series User Manual preview
TravelMate 4100 Series
Brand: Acer Pages: 86
Acer TravelMate 4070 Service Manual preview
TravelMate 4070
Brand: Acer Pages: 113
Acer TravelMate 4100 Series Manual Do Utilizador preview
TravelMate 4100 Series
Brand: Acer Pages: 86
Acer TravelMate 420 Manuel D'Utilisation preview
TravelMate 420
Brand: Acer Pages: 82
Acer A515-44 User Manual preview
A515-44
Brand: Acer Pages: 86
bto x-book 17cl46 User Manual preview
x-book 17cl46
Brand: bto Pages: 308

Brands by name

Popular brands

Load more brands