PAGE 6
GRV43MDT
INSTRUCTION MANUAL
WIRELESS INSTALLATION DIAGRAM
Wireless installation refers to the connection of the video signal to the monitor. In a wireless
installation there is no need to run a video cable through the passenger compartment which can be
difficult for some DIY installers. Instead the signal is sent wirelessly to the mirror monitor. This feature
means that the time and difficulty of installing the cameras system is greatly reduced. At the rear of
car the camera is connected to a wireless transmitter which is powered from the reverse taillight wire.
In the event that you live in an area were RF interference is a problem (Poor video signal), you may
need to change your installation to wired.
F
F
F
M
M
F
F
F
F
Moulded
splitter
Camera
M
M
Powerwires
(ACC)
+
W
ir
eless
Recie
ver
Powerwires
(Reversing light)
+
Wireless
Transmitter
Mirror
(Optional front camera)
