6
Installation of Dash Cam
1. Make sure the vehicle is turned off.
2. Insert the Micro SD card into the Micro SD card slot in the mirror.
3. Secure the Dash Cam Mirror over the existing vehicles factory
mirror using the straps and tighten securely. Make sure the Dash Cam
camera lens is not obscured by the factory mirror.
4. Insert Mini USB end of the in car charger into the Mini USB
interface/ charging point of the Dash Cam. Place socket end of the car
charger into 12/24V power socket of vehicle.
5. If you have installed the rear camera to the rear of the vehicle, pay
attention to the direction of the installation. The cabling can be laid
and hidden behind the vehicles roof lining. After completing the
installation ,insert the plug in the Dash Cam’s rear camera interface
6. Adjust the mounting bracket and rotate the camera direction to get
the best view. Ensure of the vehicles bonnet is visible from the
bottom of the screen for alignment.
7. Turn vehicles ignition to accessories, the Dash Cam will power ON
and start recording automatically, you will hear an audible tone once
powered.
8. A red circle on the screen will start flashing when recording.
9. A white flashing battery symbol will show when the Dash Cam is
receiving power.
10. For the Dash Cam to work it must receive power from the car
charger. Once power is removed or turned off the Dash Cam will save
the current file and turn off.
