12
Loop Recording:
This feature allows you to set the size of the files your DASH
CAM will record before saving and creating a new file. We recommend the DASH
CAM to be set to ‘3’ minute files.
Exposure:
This feature will change the white input. We recommend it always be
set at ‘+0.0’.
Date Stamp:
This feature will stamp the date and time on all your footage
produced by your DASH CAM .
Record Audio:
This Feature will allow you to turn the DASH CAM s recording
sound on or off. If you want to stop the DASH CAM recording sound in the cab of
your vehicle, set this feature to ‘off’.
G Sensor Sensitivity:
This feature allows you to set the sensitivity of the Gravity
sensor in the DASH CAM . We recommend this be set to ‘Low’ to help stop false
or irrelevant triggering of the Dash Cam, and to avoid the cards storage capacity
filling up with event footage. (Non loop files)
Press the menu button again until you see the following Spanner and screwdriver.
(SETUP MENU)
Date/Time:
This feature will allow you to change the year, month, day and time.
To change the date simply use the arrow keys to go up or down. Press the OK
button to move onto the next section. Again, use the arrow buttons to go up or
down. Once through all the section, pressing OK again will finish the setup.
Beep Sound:
Allows you to turn the beeping sound on or off.
Language:
Allows you to choose from a selection of languages that include:
English, Dutch, French, Spanish, Italian, Portuguese, Simplified Chinese,
Traditional Chinese, Japanese, Russian and Korean.
Frequency:
This feature allows the best recording in conditions where street
lights and ac lighting is used. The Australian standard frequency is 50HZ so it
should be set to ‘50hz’.
