1. There are three ways you can mount the monitor, either
suction, vent or the adhesive mount.
With the suction mount the monitor can be mounted
to the windscreen or dash and be easily removed.
Attach the suction mount to the back of the monitor
using the supplied screwdriver and threaded screw.
Pay attention to orientation see pictures below.
With the suction lever in the released position,
press the suction cup against the windshield. Press the suction
lever toward the suction cup to lock the mount. To adjust the
angle of monitor, loosen the collar on the ball joint, re-tighten in
the desired position.
The adhesive mount can be used to permanently fix
the monitor to the dash. Attach the adhesive mount
to the back of the monitor using the supplied
screwdriver and threaded screw. For good
adhesion thoroughly clean the dash or windscreen
before mounting.
6
Monitor Installation
Screw
Align
Rotate and Lock
Summary of Contents for GRV43SKT
Page 16: ......
