P9
P10
GT904SD configurations
Scan the QR code to go to our website. Click on the icon for a full schematic wiring
diagram to suit your installation.
Note: Additional cameras and wiring may be required depending on your
application, compatible products are available on our website.
This system comes with one camera as illustrated above, however it is capable of
running up to 4 cameras and can cover a very large array of vehicle requirements.
The following diagrams show some additional (but not all), configurations that the
system is capable of handling with the addition of some extra cameras and associated
accessories. Please refer to our web site for detailed schematics of these installations.
This camera can be used for reversing or as a rear-view mirror substitute
Turn signal activated used as blind spot detection.
Having two cameras at the back, one camera can be optimised for parking (top down view)
whilst the other can look backwards and be used as a rear-view mirror substitute.
x2
x2
x2
Turn signal activated used
as blind spot detection
Turn signal activated used as blind spot detection
Turn signal activated used as blind spot detection
Turn signal activated used as blind spot detection
