10
/
12
Restore to factory
setting
www.gatorcn.com
If you want to make all parameter
setting back to default factory data.
Once received “OK”, it means
restore success.
Check GPS location
url#
After sending this command to
device successfully , it will reply a
location Google Map Link, you can
check where the car is by clicking
Link .
If device does not search any
information of location , it will reply
‘No data ‘
Cut off engine
close oil,*123456* cut off engine
restore oil,*123456* cancel cut off
engine
After the command is carried out, it
will reply “Cut off the fuel supply:
Success! Speed:0 Km/h”
To ensure the safety of the driver and
the car, this command is valid only
under two conditions: the GPS is
located; the speed is less than
20km/h.
you should set specific number
first, Only specific number can
send the command to the device to
cut off and restore engine.
Voice monitoring
tap,*123456*
After set successfully
，
device will
call the monitor cell phone, it will
enter voice monitoring status .
Note: To realize this function, please
set specify numbers beforehand.
The SIM card put into the device
should be equipped with caller
identification
