background image

 

 

 

Remove this small iron piece                Insert the SIM card in as directed      Restore the small iron piece 

Choose SIM card:   

 

The type of the SIM card is GSM card (the SIM card of China Mobile is recommended).   

 

Make sure the SIM card has sufficient amount in order to pay the communication cost.   

 

Prepare  one  piece  of  SIM  card  for  mobile  phone  (the  SIM  card  of  China  Mobile  is  recommended), 

make sure that the card has opened such functions of 

Caller ID

 and receiving and sending messages. If 

necessary, use the service platform to track the GPRS function to be opened in real time.   

 

Chapter IV Commands Corresponding to and Operation Method of Basic Functions 

1. Location Inquiry   

(1) SMS Inquiry   

Create 666 + password command (defaulted password as 0000) via mobile phone and send it to the student 

terminal mobile phone number; after successful sending, the guardian‟s mobile phone will receive a piece of 

word message. See the flow as follows:   

 

 

Send command to the terminal      The terminal will return confirmation message to the mobile phone 

 

By the same means, send the command 987 + password to the terminal, then the terminal will return one 

piece of website message. The guardian may inquire the location information of the ward attached with local 

map through this website message.   

 

Summary of Contents for PT350















Reviews: