6
2. Setup of Center Number
Set the center number by means of SMS through mobile phone. After the setup is successful, then the
mobile phone sending the SMS will receive the “config OK” response message from the terminal.
Command format: #710# center number # user password ##
For example: #710#134xxxxxxxx#0000##
Note: All alarming information thereafter including SOS, low power, electronic fence, etc will be returned
to such number.
3. Bi-directional Call Function
Send the command in form of SMS through mobile phone to the terminal. After the setup is successful,
after sending the SMS, the mobile phone will receive the config OK response message returned from the
terminal.
Setup format: #711# Call 1# Call 2 # Call 3 # 0000##
For example:
Send command to the terminal The terminal will return confirmation message to the mobile phone
Note: After the setup is successful, press the CALL 1 button, then the terminal will automatically dia the
first phone number. Press the CALL 2 button, then the terminal will automatically dial the second phone
number. In addition, the terminal may receive all calls by pressing the Receive button and end all calls by
pressing the End button.
Remarks: The automatic receiving function of the terminal. For all calls, if the terminal does not choose to
end or receive within 30s, they can be received automatically.
4. SOS Function
If a ward
，
3number (the number in 3 above) is set, when the ward encounters emergency and presses the
SOS button, then the terminal will send alarming information to the center number and dial three ward numbers
in order.
5. Monitoring Function
The ward may send SMS 555 + password to the terminal of the ward; in such case, the ward terminal of
the ward will automatically call back the mobile phone of the guardian and the guardian may listen to the sound
of the surroundings within 10m around the ward.
