剛開始啟動GPS時，建立原點的訊號位置可能在機體半徑5m內的任何一點。
回航點
經過衛星數的增加及訊號的收斂，
精確度可提高至2m內。
此時在定位模式下按SET鍵，可重新輸入更精確的
原點。(輸入時SET燈會閃爍)
所以當你移動機體要重設原點時，也是一樣在定位模式下按SET鍵即可。
Go-Home Function
1.While just starting the GPS system, the “Home” position range may be within a radius of 5m.
2.By increasing the numbers of satellites received
and wait for convergence of signal, the precision
may increase to be within a radius of 2m range.
3.Then press “SET” buttom under GPS positioning
mode will make the “Home” position setting to be
.
more accurate. (“SET” LED light flashes.)
4.When you move the 500X away to a new location, and would like to reset “Home” position,
just press “SET” button under GPS positioning mode to reset new “Home” position.
16
